WIFI
WiFi Connection Set up via SEMS App
1. Once create the plant, click the WiFi set up button on App and click Next. 2. Go back to mobile wifi setting and connect with inverter's Solar WiFi (password: 12345678), go back to SEMS APP after the Solar WiFi is successful ...
After configuration, the yellow led blinks four times regularly within 1.6 sec.
1.Connect to the Wi-Fi router and visit the portal. Check the portal is available or not; 2.Restart Wi-Fi router and inverter.
After configuration, the yellow led blinks twice regularly within 1.6 sec.
1. Restart inverter; 2. Connect to Solar-WiFi and login again, check the 'SD', 'Security Mode', 'Encryption Type' and 'Pass Phrase' is matching with that ofWi-Fi router or not; 3. Connect to Wi-FI router and login to check if the connection reaches ...
Cannot find the SSiD of Wi-Fi router in site list?
1. Move Wi-Fi router closer to inverter or use a WI-Fi repeater devlce, restart Wi-Fi in "Management' page; 2. Connect to Wî-Fi router and login the setting webpage to check the channel it uses. Please make sure the channel is not bigger ...
Cannot login webpage of Solar-WiFi?
1. Try admin/admin as username and password; 2. Do 'WiFi Reload’ operation, and try admin/admin again; 3. Repeat step2 again. 4. Confirm the website is http://10.10.100.253/
Cannot connect to Solar-WiFi?
1. Try password ‘12345678'; 2. Restart inverter, 3. Do 'WiFI Reload operation, and try password '12345678' again.
Cannot find Wi-Fi signal of Solar-WiFi?
1. Make sure inverter is power on and antenna is intalled;- 2. Move closer to inverter; 3. Restart inverter, 4. Do 'WiFI Reload operation via button on the front cover of inverter.
WiFi Configuration via APP
Via APP Preparation a. Power Wi-F¡ inverter on; b. If you are configuring Wi-Fi inverter, make sure the yellow led on front cover is blinking; c. Power Wi-F¡ router on; d. Search for the keyword "SEMS Portal" from Google Play Store or Apple App ...
WiFi Configuration via Browser
Via Browser Preparation Power on the inverter. Make sure the router is turned on. Switch on the WLAN of laptop. 1. Look for the WiFi signal “Solar-WiFi*”(*means the last 8 characters of the inverter SN) in WLAN center and connect it. Password: ...