XS remote shutdown connector
The XS inverter supports the Remote Shutdown functionality. A connector is supplied for this, which must be connected regardless of whether the Remote Shutdown function is used. If the connector is not installed then the inverter will remain in 'waiting' status, thus will not generate power.
The connector is equipped with a green wire (+/- 3 cm) that is connected at the bottom. This connector can be found in the separate box supplied in the inverter box. This separate box also states that it is mandatory to connect this connector.
If the green wire is missing, a 1mm2 wire can easily be used to loop through pin 4 and pin 5. Any other wires or components present on the bottom side of the connector should be removed. See the following photo for the correct configuration:
The RemoteShutdown connector must be installed between the AC connector and WiFi module. See the following photos for the exact location:
Related Articles
RCR – Ripple Controle Receiver
Grid providers in some Markets (e.g. Germany for PV Systems >25kW or as requirement for state subsidies) require that PV Plants are controllable by them via RCR. Technically this is a small box with 4 Relays triggered by a simple form of PLC signal ...Wi-Fi connection Issues
You may have issues with the Wi-Fi connection between your inverter and your modem/router. As long as the other indicators on the inverter show “Normal” or “Generating”, a faulty Wi-Fi connection does not affect the electricity production or ...How to configure EZLoggerPro
There are 2 options to connect the inverter(s) to EZLoggerPro: 1. Pull separate cables from separate inverter to Ezlogger and connect them to eg com1 and com2 2. Connect inverters wth the 2-wires RS485 cable, and then connect to EZLoggerPro Then ...Adjusting the price per kWh in the SEMS Portal
You indicated that you want to change the price per kWh in your monitoring environment. The price per kWh is used to calculate your income from the PV system and is displayed in the SEMS Portal. Usually, the price per kWh is set up during the ...Transfer the SEMSPortal-account to a new owner
If there is a new owner of the inverter and you wish to transfer the monitor account on SEMS Portal. There are 2 ways to transfer the monitoring account to a new owner or email: Option 1 (Transfer your account and the historical data) This option ...